Ph.D., Mechanical Engineering (CFD and Turbulence modeling), Manchester University (UK), 2004
M.Sc., Thermal Power and Fluids Engineering, Manchester University (UK), 2000
Dip. Eng., Marine Engineering, The University of Sciences and Technology of Oran (ALG), 1996
Introduction to Fluid mechanics
Large Eddy Simulation, RANS and URANS aproachs
Heat and Mass transfer
Verification and validation CFD
Natural and mixed convection
2015Y. J. Park, J. M. Ha, G. Ali, H. J. Kim, Y. Addad, and S. Oh Cho, “Controlled Fabrication of Nanoporous Oxide Layers on Zircaloy by Anodization” nanoscale Research Letters, 10:377, 2015, DOI 10.1186/s11671-015-1086-x
2015 Addad Y., I. Zaidi, and D. Laurence, “Quasi-DNS of natural convection flow in a cylindrical annuli with an optimal polyhedral mesh refinement” Computers & Fluids, Vol. 118, pp 44–52
2015 Wibisono, A. F., Y. Addad, and J. Ik, Lee, “Numerical investigation on water deteriorated turbulent heat transfer regime in vertical upward heated flow in circular tube”, Int. J. of Heat and Mass transfer, Vol. 83, 2015, pp 173-186.
2014 S. G. Kim, J. Lee, Y. Ahn, J. I. Lee, Y. Addad, B. Ko, “CFD investigation of a centrifugal compressor derived from pump technology for supercritical carbon dioxide as a working fluid”, J. Supercritical Fluids, Vol. 86, 2014, pp 160-171.
2013 Ouadha A., Baghdad M., and Addad Y.“Effects of variable thermophysical properties on flow and energy separation in a vortex tube”, Int. J. of Refrigeration, Vol. 36, Issue 8, 2013, pp 2626-2437.
2013Wibisono, A. F., Ahn, Y., and Lee, J. Ik, Addad Y. “Studies of Various Single Phase Natural Circulation Systems for Small and Medium Size Reactor Design”, J. of Nuclear Design. 262, 2013, pp 390–403.
2013 Yi, Y., Cho, P., Al Zaabi, A.,Addad, Y., Jang, C. “Potentiodynamic behavior of AISI type 316 stainless steel in NaCl solution”, J. of Corrosion Science, 74, 2013, pp 92-97.
2012 Keshmiri A., Cotton M. A., Addad Y. and Laurence D. “Turbulence Models and Large Eddy Simulations applied to Ascending Mixed Convection Flows” Flow Turbulence and Combustion, Vol. 89, 2012, pp 407-434.
2012 Yoon H. J., Ahn Y., Lee J. I., Addad Y., “Potential advantages of coupling supercritical CO2 Brayton cycle to water cooled small and medium size reactor”, Nuclear Eng. and Design, Vol. 245, 2012, pp 223-232.
2011 Ouadha A., Baghdad M., Imine O., and Addad Y., “Numerical study of energy separation in a vortex tube with different RANS models” Int. J. Thermal sciences, Vol. 50, 2011, pp 2377-2385.
2008 Addad Y., Gaitonde U., Laurence D., “Optimal unstructured meshing for Large Eddy Simulations” Book Chapter in Quality and reliability of large-eddy simulations. ERCOFTAC Series, Vol. 12, Part I, Springer, pp 93-103, ISBN: 978-1-4020-8577-2.
2007 Addad Y., Prosser R., Laurence D., Moreau S., and Mendonca F., “On the use of embedded meshes in the LES for external flows” J. of Flow Turbulence and combustion, 80, 2007, pp 393-408.
2007 Aounallah M., Addad Y., Benhamadouche S., Imine O., Adjlout L., Laurence D., “Numerical investigation of turbulent natural convection in an inclined square cavity with a hot wavy wall” Int. J. Heat & Mass Transfer, Vol. 50, 9-10, 2007, pp 1683-1693.
2006 Belkadi M., Aounallah M., Imine O., Adjlout L., Addad Y., “Free Convection in an inclined square cavity with partial partitions on a wavy hot wall” PCFD, Int. J., Vol. 6, No. 7, 2006, pp 428-434.
2006 Benhamadouche S., Jarrin N., Addad Y., Laurence D., “Synthetic turbulent inflow conditions based on a vortex method for large-eddy simulation” PCFD, Int. J., Vol. 6, No. 1/2/3, pp 50-57.
2004 Addad Y., Benhamadouche S., and Laurence D., “The negatively buoyant wall-jet: LES database” Int. J. Heat fluid Flow 25, 2004, pp 795-808.
2003 Addad Y., Laurence D., Talotte C., Jacob M. C., “Large-Eddy Simulation of a forward-backward facing step for acoustic source identification”, Int. J. of Heat and Fluid Flow 24, Issue 4, 2003, pp 562-571
2015 A. M. Al-Ghafri, Y. Addad, Yoon H. J., “Numerical Investigation to Examine Dust impacts on the Dry Cask passive Cooling under UAE harsh environmental conditions” proceedings of NENE2015, 24th Int. Conf. Nuclear Energy for New Europe, September 14-17, Portorož, Slovenia.
2015 H. J. Yoon, S. Al Hashmi, Addad Y., “Downcomer Boiling Phenomena Analysis during Large Break Loss of Coolant Accident In APR1400” proceedings of NENE2015, 24th Int. Conf. Nuclear Energy for New Europe, September 14-17, Portorož, Slovenia.
2015 B-H. You, Y. H. Jeong, Addad Y., “RANS Simulation of Turbulent Swept Flow over a Wire in a Channel for Core Thermal Hydraulic Design” proceedings of NURETH-16, 16th Int. Topical Meeting on Nuc. Reactor Thermal Hydraulics, August 30-04 Sept., Chicago, IL, USA.
2015 Addad Y., Al Noamani F. S. R., “Predictions of Radioactive Material Releases in Gaseous Effluents under the UAE Environmental Conditions” Proceedings of ICWE14 14th Int. Conf. on Wind Eng. , June 21-26, Puerto Alegre, Brazil.
2015 Wibisono A. F., Y. Addad, and J. Ik Lee, “A CFD assessment for mixed convection of nanofluids for nuclear application” Proceedings of ICONE23 23nd International Conference on Nuclear Engineering, May 17-21, Chiba, Japan.
2014 Nietiadi Y. S., J. I. Lee, Addad Y., “CFD Study of Strongly Heated Upward Turbulent Gas Flow”, Korean Nuclear Society Autumn Meeting, Pyeongchang, Korea, October 30-31.
2014 Kim S. G., Ahn Y., Lee J., Lee J. Ik, Addad Y., B. Ko, “Numerical investigation of a centrifugal compressor for supercritical CO2 as a working fluid”, Proceedings of ASME Turbo Expo 2014 (GT2014), Dusseldorf, Germany, June 16-20.
2014 Nietiadi Y. S., Lee J. Ik, Addad Y. “Study of Strongly Heated Upward Turbulent Gas Flow using v2-f turbulence model” Korean Nuclear Society Spring Meeting, Jeju, Korea, May 29-30.
2014 Wibisono A. F., Y. Addad, and J. Ik Lee, “A v2-f model assessment for mixed convection in water-cooled SMR configuration”, Proceedings of ICAPP 2014, Charlotte, USA, April 6-9.
2014 Nietiadi Y. S., J. Ik Lee, and Y. Addad, “Study of strongly heated upward turbulent gas flow”, Proceedings of ICAPP 2014, Charlotte, USA, April 6-9.
2013 Wibisono A. F., Nietiadi Y. S., Addad Y., Lee J. Ik, “An Assessment of v2-f Model for Water Mixed Convection under SMR Configuration”, Korean Nuclear Society Autumn Meeting, Gyeongju, Korea, October 24-25.
2013 Wibisono A. F., Ahn Y., Williams W. C., Addad Y., and Lee J. Ik, “Challenging issues in iPWR with single phase water naturally circulating system”, Proceedings of ICAPP 2013, Jeju Island, Korea, April 14-18, 2013, Paper No. KA041.
2013 Kim S. G., J.K. Lee, Y. H. Ahn, J. I. Lee, Y. Addad, “Numerical Investigation of a Supercritical CO2 Centrifugal Compressor”, ANS 2013 Winter Meeting, United States, 2013
2013 Al Hebsi M., Addad Y., ” Numerical Investigation on the Dissolution of a Light gas Stratification in a Safety Containment Model” ANS 2013 Student Conference, MIT, Boston, MA, USA, April 4-6, 2013.
2012 Zaidi I., Addad Y., Laurence D., “DNS of The Buoyancy Driven Flow Inside a Horizontal Coaxial Cylinder”, THMT-12, Turbulence, Heat and Mass Transfer, Sicily, Italy, Sept. 24-27.
2012 Addad Y., Lee J. I., “LES and URANS predictions of thermal load in piping systems; T-Junction”, Proceedings of ICONE20 20th International Conference on Nuclear Engineering, July 30- August 03, 2012, Anaheim, California, USA.
2011 Baghdad M., Ouadha A., Addad Y., “Effects of Variable Thermophysical Properties on Flow and Energy Separation in a Vortex Tube”, the 23rd IIR International Congress of Refrigeration, August 21-26, 2011, Prague, Czech Republic.
2011 Yoon H. J., Ahn Y., Lee J. Ik, Addad Y., “Preliminary Results of Optimal Pressure Ratio for Supercritical CO2 Brayton Cycle coupled with Small Modular Water Cooled Reactor”, Supercritical CO2 Power Cycle Symposium, Boulder, Colorado, May 24-25.
2011 Ouadha A., Baghdad M., Imine O., and Addad Y., “CFD Simulation of Flow and Energy Separation in a Vortex Tube”, the Sharjah Int. Conf. On Nuclear & Renewable Eng., Sharjah, UAE, 3-5 April.
2009 Keshmiri A., Cotton M.A., Addad Y., and Laurence D., “Thermal-Hydraulic Analysis of Flow in Rib-Roughened Passages with application to Gas-cooled Nuclear Reactors” Turbulence Heat and Mass Transfer 6, Rome, Italy, 14-18 September 2009.
2009 Keshmiri A., Cotton M.A. and Addad Y., "Numerical Simulations of Flow and Heat Transfer over Rib-Roughened Surfaces", 17th Annual conf. of CFD society of Canada, Ottawa, Canada, 3-5 May 2009.
2009 Howard R. and Addad Y., “The Effects of Different Grids and Different LES Models on Turbulence Statistics in Channel Flows”, Int. Symposium on CHMT, April 26th - May1st, 2009, Tunisia.
2008 Keshmiri A., Cotton M.A., Addad Y., Rolfo S., and Billard F., “RANS and LES Investigations of Vertical Flows in the Fuel Passages of Gas-Cooled Nuclear Reactors”. 16th Int. Conf. on Nuclear Engineering, (ICONE16), Orlando, Florida, USA, 11th-15th May 2008.
2008 Keshmiri A., Cotton M.A., Addad Y., Laurence D.R, and Billard F., “Refined Eddy Viscosity Schemes and LES for Ascending Mixed Convection Flows” Proc. 4th Int. Sym. on Advances in Computational Heat Transfer,(CHT-08), Marrakech, Morocco, 11th-16th May 2008.
2008 Addad Y., Mahmoodilari M., and Laurence D., “LES and RANS Computations of Natural Convection in a Nearly-Horizontal Cavity”, Proc. 4th Int. Sym., on Advances in Computational Heat Transfer (CHT-08), Marrakech, Morocco, 11th-16th May 2008.
2008 Ammour D., Adjlout LA., Addad Y., and Revell A., “Numerical Simulation of an In-line Tube Bundle using the URANS Approach”, 13th Int. Conference on Applied Mechanics and Mechanical Engineering, Cairo Egypt, 27-29 May 2008.
2008 Addad Y. and Laurence D. R., “LES for Buoyancy-Modified Ascending Turbulent Pipe Flow”, 7th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements (ETMM7), Limassol, Cyprus, 4-6 June 2008.
2007 Addad Y., Gaitonde U., Laurence D. “Optimal unstructured meshing for Large Eddy Simulations” Quality and reliability of large-eddy simulations, Leuven, Belgium, 24-26 October 2007.
2006 Addad Y., Laurence D., and Rabbitt M., “Turbulent Natural Convection in Horizontal Coaxial Cylindrical Enclosures: LES and RANS Models” Turbulence, Heat and Mass Transfer 5, Dubrovnik, Croatia.
2003 Addad Y., Benhamadouche S., and Laurence D., “The negatively buoyant wall-jet: LES database”, 4th Int. Symposium on THMT, Turkey, 12-17 October, 2003.
2003 Jarrin N., Benhamadouche S., Addad Y., Laurence D., “Synthetic turbulence inflow conditions for large-eddy simulation”, 4th Int. Symposium on THMT, Turkey, 12-17 October, 2003.
2002 Talotte C., Addad Y., Laurence D., Jacob M. C., Giardi H., “Comparison of Large Eddy Simulation and experimental results of the flow around a forward-backward facing step”, ASME Fluids Engineering Division Summer Meeting, Canada, Quebec, July 14-18, 2002.
2002 Addad Y., Laurence D., Talotte C., “Large-Eddy Simulation of a forward-backward facing step for acoustic source identification”, 5th Int. Symposium on ETME, Maillorca, Spain, 16-18 September, 2002.